- #Zio smartmedia card reader driver install#
- #Zio smartmedia card reader driver free#
- #Zio smartmedia card reader driver windows#
Starting at the first 20, change the numbers to the ones shown in red in Figure B, which are underlined in green. As you did the first time, locate the first copy of the CIS, and find the string of 20's (underlined in fig. Do not use the altered copy you have just made to begin the second hack! After you have opened the original file again, proceed as below:
Important! After saving the copy of smprep1.exe, close it, and open the original smprep.exe. Step 2: Find the second copy of the CIS, which uses the same string as the first one you can probably just scroll down a few lines and find it, or you can use the search feature again to find it. To make the first hacked version of smprep (the one that damages the CIS), change the first 01 to 02. You can use the edit.find feature to search for the following string: 01 03 D9 01 FF (see red underline below). Step 1: Locate the beginning of the first copy of the CIS. If you save it as you work, do not overwrite the original file by using the same name. It may make things easier if you widen the "bytes" window as below to 16 numbers wide. Load the smprep.exe program into the hex editor. However, the CIS should be the same, so if you can locate that in your version of smprep.exe, you should be able to accomplish the same thing. No instructions are given for other readers, as I don't have them to work with, so if you're using a different reader, you may need to figure out any differences.
#Zio smartmedia card reader driver windows#
The following procedure is done with a Zio USB smartmedia reader, Windows 98/ME/2000, and the smprep.exe program that is installed with it. This change to 2.0 is reported to be backward-compatible with older cameras, so it should be safe to do regardless of which model you have. Check the results in the ANSI text panel. When modifying the second file, put the number 32 in place of the last number 31 (toward the end of the underlined numbers below).
Recently, some have not been able to locate this editor, but any hex editor will do, there are several available as shareware.Ī few of the latest models apparently won't work with the "OLYMPUS PAN 1.0" info, it needs to be changed to read "OLYMPUS PAN 2.0".
#Zio smartmedia card reader driver free#
editor is free and works well, though it will ask you to register it to a nonexistent address.
#Zio smartmedia card reader driver install#
Go to and find, download, and install a hex editor if you don't have one.
Don't do the procedure exactly as described on that page, as it's not entirely correct (or clear), but do try to understand what is being done.
It is actually rather simple, but does require some basic computer knowledge and care.īefore you start, go to to get a basic idea of what you're doing, and what the CIS (card information structure) is. If you don't know what a hexadecimal number is, and understand how they work, it may be best not to attempt this. Deciding whether to try it is your own responsibility, and if you don't have the same card reader and program as used here, you might have to modify the procedure to fit. The described procedure has worked well for restoring or adding the panorama capability to smartmedia cards of any brand, however if you decide to try it yourself, it is possible that you could make your card unusable unless you have the proper program and reader/writer to restore it. The panorama feature on Olympus smartmedia can be overwritten by other devices, causing you to lose the panorama function. Please email me panarama to smart media card. I have tried the instructions I found (copy document attached) Posted on Sunday, 08:00 GMTHi I am trying to format my smart media card to enable panoramic header on a non Olympus card.
0 kommentar(er)
